Re: TCPLIB
Posted: Sun Aug 16, 2020 12:27 am
[quote=daniel_spain post_id=158 time=1597533346 user_id=65]
Abraxis wrote:
> daniel_spain wrote:
> > Abraxis wrote:
> > > [quote=robmich post_id=126 time=<a href="tel:1597368832">1597368832</a> user_id=79]
> > > Which offline utilities are you trying to run? Are you getting the big red
> > > box while in the menu tree program?
> > >
> > > Rob
> > > [/quote]
> > >
> > > Yup, that’s one of them. The names of the others escape me right now.
> >
> > you're running 3.30 right? there should be no TCPLIB file dependencies.
> > you claim 20 years ago, were you running wg2 then and upgraded to 3.30 now?
> > i'm telling ya this brings back a dejavu.... i remember this exact bug where it
> > was telling me TCPLIBM was missing. but this was a wg2 issue. Trying to think
> > in terms of 3.30 what would be calling it, send a shot of *.MDF and *.DMD
> > it will only tell you that if an addon is not disabled that has a requirement in
> the
> > MDF file to require TCPLIB
> >
> > like so:
> >
> > [example]
> > ; TCPMIDEC.MDF
> >
> > Module Name: TCP/IP Mime Decoder
> >
> > Developer: Vircom Inc. [SDU]
> >
> > INTERNAL
> > UNCONDITIONAL
> >
> > Requires: TCPLIB TCPSMTP
> > Replaces:
> >
> > Install:
> >
> > Online user manual:
> >
> > DLLs: TCPMIDEC
> > MSGs:
> >
> > Btrieve page size:
> > Btrieve files:
> >
> > Cleanup:
> >
> > Event-1:
> > Event-2:
> > Event-3:
> > Event-4:
> >
> > Add-On Utility:
> >
> > I need:
> >
> > [/example]
> >
> > in the above MDF file notice the Requires: TCPLIB? so if remove TCPLIB.MDF it
> will
> > throw that error you're getting.
> > and removal can be physical removal or disabling by renaming it to TCPLIB.DMD
> >
> > type WGSDMOD and look at your disabled addons, if none when it gives you the
> error
> > tell me what module is giving the error.
>
> Haven’t been able to find the culprit, guess I will just disable most of the modules,
> and reenable them one by one as I restart the server each time.
>
> On a somewhat related note, I am suffering from an embarrassment of riches here: I
> own almost every piece of web/internet software out there, and am wondering about the
> best combination to use for a multi homed multiple website system that I hope to get
> up and running soon.
>
> I own:
>
> Murk works Worldsock
> Webblaster Nt?
> Gcomms ICO “of course”
> Vircom AMIS, DMS client, Radius, TCPWEB2, and I think a couple more. Only one I don’t
> own is DMA server I think.
> Weblines
>
> The easy way would be to use the Vircom stuff, I believe, but no support....
>
> Your thoughts are appreciated!
TCPWEB2 is the culprit. Thats the Major TCP/IP WEB server. Check TCPWEB2.MDM i believe its the web server.
[/quote]
Yep, that was it. Finally found it!
Thanks
Abraxis wrote:
> daniel_spain wrote:
> > Abraxis wrote:
> > > [quote=robmich post_id=126 time=<a href="tel:1597368832">1597368832</a> user_id=79]
> > > Which offline utilities are you trying to run? Are you getting the big red
> > > box while in the menu tree program?
> > >
> > > Rob
> > > [/quote]
> > >
> > > Yup, that’s one of them. The names of the others escape me right now.
> >
> > you're running 3.30 right? there should be no TCPLIB file dependencies.
> > you claim 20 years ago, were you running wg2 then and upgraded to 3.30 now?
> > i'm telling ya this brings back a dejavu.... i remember this exact bug where it
> > was telling me TCPLIBM was missing. but this was a wg2 issue. Trying to think
> > in terms of 3.30 what would be calling it, send a shot of *.MDF and *.DMD
> > it will only tell you that if an addon is not disabled that has a requirement in
> the
> > MDF file to require TCPLIB
> >
> > like so:
> >
> > [example]
> > ; TCPMIDEC.MDF
> >
> > Module Name: TCP/IP Mime Decoder
> >
> > Developer: Vircom Inc. [SDU]
> >
> > INTERNAL
> > UNCONDITIONAL
> >
> > Requires: TCPLIB TCPSMTP
> > Replaces:
> >
> > Install:
> >
> > Online user manual:
> >
> > DLLs: TCPMIDEC
> > MSGs:
> >
> > Btrieve page size:
> > Btrieve files:
> >
> > Cleanup:
> >
> > Event-1:
> > Event-2:
> > Event-3:
> > Event-4:
> >
> > Add-On Utility:
> >
> > I need:
> >
> > [/example]
> >
> > in the above MDF file notice the Requires: TCPLIB? so if remove TCPLIB.MDF it
> will
> > throw that error you're getting.
> > and removal can be physical removal or disabling by renaming it to TCPLIB.DMD
> >
> > type WGSDMOD and look at your disabled addons, if none when it gives you the
> error
> > tell me what module is giving the error.
>
> Haven’t been able to find the culprit, guess I will just disable most of the modules,
> and reenable them one by one as I restart the server each time.
>
> On a somewhat related note, I am suffering from an embarrassment of riches here: I
> own almost every piece of web/internet software out there, and am wondering about the
> best combination to use for a multi homed multiple website system that I hope to get
> up and running soon.
>
> I own:
>
> Murk works Worldsock
> Webblaster Nt?
> Gcomms ICO “of course”
> Vircom AMIS, DMS client, Radius, TCPWEB2, and I think a couple more. Only one I don’t
> own is DMA server I think.
> Weblines
>
> The easy way would be to use the Vircom stuff, I believe, but no support....
>
> Your thoughts are appreciated!
TCPWEB2 is the culprit. Thats the Major TCP/IP WEB server. Check TCPWEB2.MDM i believe its the web server.
[/quote]
Yep, that was it. Finally found it!
Thanks