BBS Setup

A place for new Sysops to meet, discuss their setup and get help.
Post Reply
hurricane1031
Posts: 7
Joined: Thu Nov 03, 2022 9:34 pm

BBS Setup

Post by hurricane1031 »

I am currently running a registered WG32 Server 256 and Major Mudd on Windows 7 Pro. I want to update my BBS configuration. I have a machine with Windows Server 2019. Right now, I am running it the system within my internal network. I may want to eventually go live in the future, but right now I do not have the time to maintain a public BBS. Can you recommend which version of BBS Software I should be using for Windows Server 2019?

User avatar
Duckula
Posts: 359
Joined: Wed Jul 22, 2020 1:19 am

Re: BBS Setup

Post by Duckula »

MBBS v10 (the current version) works with Server 2019. The demo BBS is running under this setup.

I have not tested WG3.2 under server 2019 but at a minimum the installer may have problems.

You can upgrade from v3.2 to v10.
-- Duckula

// Site admin
// Galacticomm IP owner

hurricane1031
Posts: 7
Joined: Thu Nov 03, 2022 9:34 pm

Re: BBS Setup

Post by hurricane1031 »

Thanks just submitted my registration information WG32 for MBBS v10

User avatar
Duckula
Posts: 359
Joined: Wed Jul 22, 2020 1:19 am

Re: BBS Setup

Post by Duckula »

Reply sent
-- Duckula

// Site admin
// Galacticomm IP owner

hurricane1031
Posts: 7
Joined: Thu Nov 03, 2022 9:34 pm

Re: BBS Setup

Post by hurricane1031 »

Thanks for the help got it up and running.....

Easy install! I had the system up and running within 2 hours.

grabbed all files I needed to transfer over by *.* from my wg32 file....

Truely an amazing job on The Major BBS v10.

Cheers!

hurricane1031
Posts: 7
Joined: Thu Nov 03, 2022 9:34 pm

Re: BBS Setup

Post by hurricane1031 »

My windows server 2019 machine crashed. Good thing i made a backup of the v10 data.....

I imported the data to a Windows 10 Pro 64-bit machine and its up and running great. I'm only running Major Mudd on an internal network... The only error I'm getting is, it's trying to connect to Worldlink with the error: WorldLink was just aborted. Reason: CONNECT 1950362368 NEVER RECEIVED

I did not get this error with windows 2019, but seems to be a problem with Windows 10 Pro.

Any suggestions?

User avatar
Duckula
Posts: 359
Joined: Wed Jul 22, 2020 1:19 am

Re: BBS Setup

Post by Duckula »

Potentially a windows 10 firewall issue? Is outbound telnet allowed?
-- Duckula

// Site admin
// Galacticomm IP owner

Post Reply