MajorLink Teleconference changes

General Project Phoenix discussion
Post Reply
User avatar
Duckula
Posts: 359
Joined: Wed Jul 22, 2020 1:19 am

MajorLink Teleconference changes

Post by Duckula »

As part of the slow transition of rebranding WorldLink to MajorLink, the MajorLink Hub has been updated and the default Teleconference channel has changed to "MajorLink" instead of "WorldLink". To support this, MBBS v10 also required an update to one of the modules (galtlcw) which can be downloaded at www.themajorbbs.com/files. There are two options:

New systems should download and install the Full Installer and those already running MBBS v10 can use the Upgrade Installer to update (as always, backup before updating).

For any MBBS v10 system that have not updated, users will by default be sent to their local MAIN channel, requiring them to type "/j MajorLink" to join the correct channel.
-- Duckula

// Site admin
// Galacticomm IP owner

Questman
Posts: 160
Joined: Fri Aug 07, 2020 2:12 pm
Location: Raleigh, NC
Contact:

Re: MajorLink Teleconference changes

Post by Questman »

If you have a system that has the patched GALTLCW that I released years ago to support auto-join of a Worldlink channel when Worldlink was connected, go into the MSG file and change the name of the channel from WorldLink to MajorLink.
Founder, The Major BBS Restoration Project
Owner, Elwynor Technologies ISV
Former Owner, Galacticomm IP (2005-2020)
Contributor, Galacticomm IP baseline

Post Reply