I have been trying to install the latest majorbbs v10 beta and keep getting this error betrieve open error 20 on file WGSMENU2.dat
I opened the menu editor and it all looks fine,i ran the offline utilities disable modules and there wasnt any that needed to be removed like in the text in the install
any help please
betrieve error
Re: betrieve error
There is likely to be two reasons:
1 - You haven't set wgsappgo.exe to run as an administrator as required.
2 - The MKDE process is staying open for some reason after you shut the BBS down and try to re-open it. You can manually kill it via task manager.
I am banking on reason 1 which is commonly missed when setting up for the first time.
1 - You haven't set wgsappgo.exe to run as an administrator as required.
2 - The MKDE process is staying open for some reason after you shut the BBS down and try to re-open it. You can manually kill it via task manager.
I am banking on reason 1 which is commonly missed when setting up for the first time.
-- Duckula
// Site admin
// Galacticomm IP owner
// Site admin
// Galacticomm IP owner
- banjaxster
- Posts: 50
- Joined: Sun Aug 09, 2020 3:57 am
Re: betrieve error
hello
yes you are right about the apgo and wow its been a long time since i setup a board from scratch.
now that its running it looks very simular to the 3.20 WG
Next i want to try to get mud working if I can find the installs and mod installs,will mud work on this version and my computer is 64 bit?
Thanks for your help
yes you are right about the apgo and wow its been a long time since i setup a board from scratch.
now that its running it looks very simular to the 3.20 WG
Next i want to try to get mud working if I can find the installs and mod installs,will mud work on this version and my computer is 64 bit?
Thanks for your help
- banjaxster
- Posts: 50
- Joined: Sun Aug 09, 2020 3:57 am
Re: betrieve error
ok I got mud installed and working but with one problem in the config area there is no mmud showing so i can add my codes its in demo mode now and working fine
is there a file maybe thats missing that puts in the area for the codes? I was wondering is the area you put the codes in maybe in the mmud.dll?
is there a file maybe thats missing that puts in the area for the codes? I was wondering is the area you put the codes in maybe in the mmud.dll?
Last edited by banjaxster on Mon Apr 17, 2023 11:37 pm, edited 1 time in total.
Re: betrieve error
Duckula wrote:
> There is likely to be two reasons:
>
> 1 - You haven't set wgsappgo.exe to run as an administrator as required.
>
> 2 - The MKDE process is staying open for some reason after you shut the BBS
> down and try to re-open it. You can manually kill it via task manager.
>
> I am banking on reason 1 which is commonly missed when setting up for the
> first time.
Crash on me the first time I use it. Just shuts down and leaves the log window open.
After running as Admin, I got a boot screen with the main console the second time. A few minutes later it crashed again.
One thing is for sure the first fix I see is window scaling needs work. I try to make the window larger I get garbage.
My Old Version 1.01 works fine under Windows XP with Dan's Packet Driver. And I can go Fullscreen with ALT+Enter.
Good Luck with the Development of Version 10.
> There is likely to be two reasons:
>
> 1 - You haven't set wgsappgo.exe to run as an administrator as required.
>
> 2 - The MKDE process is staying open for some reason after you shut the BBS
> down and try to re-open it. You can manually kill it via task manager.
>
> I am banking on reason 1 which is commonly missed when setting up for the
> first time.
Crash on me the first time I use it. Just shuts down and leaves the log window open.
After running as Admin, I got a boot screen with the main console the second time. A few minutes later it crashed again.
One thing is for sure the first fix I see is window scaling needs work. I try to make the window larger I get garbage.
My Old Version 1.01 works fine under Windows XP with Dan's Packet Driver. And I can go Fullscreen with ALT+Enter.
Good Luck with the Development of Version 10.
Re: betrieve error
banjaxster wrote:
> ok I got mud installed and working but with one problem in the config area
> there is no mmud showing so i can add my codes its in demo mode now and
> working fine
> is there a file maybe thats missing that puts in the area for the codes? I
> was wondering is the area you put the codes in maybe in the mmud.dll?
MMUD activation codes are entered in-game under the Sysop menu.
> ok I got mud installed and working but with one problem in the config area
> there is no mmud showing so i can add my codes its in demo mode now and
> working fine
> is there a file maybe thats missing that puts in the area for the codes? I
> was wondering is the area you put the codes in maybe in the mmud.dll?
MMUD activation codes are entered in-game under the Sysop menu.
-- Duckula
// Site admin
// Galacticomm IP owner
// Site admin
// Galacticomm IP owner
- banjaxster
- Posts: 50
- Joined: Sun Aug 09, 2020 3:57 am
Re: betrieve error
the mud codes cant be entered under the sysop menu ,thats for addon modules only
I found a messge about this from 2020 where the WGSCNF.exe wont show the mud code areas the reply was its under WGSCNF-L3 whatever that is
I found a messge about this from 2020 where the WGSCNF.exe wont show the mud code areas the reply was its under WGSCNF-L3 whatever that is
-
- Posts: 406
- Joined: Sun Aug 09, 2020 2:39 am
Re: betrieve error
banjaxster wrote:
> the mud codes cant be entered under the sysop menu ,thats for addon modules
> only
> I found a messge about this from 2020 where the WGSCNF.exe wont show the
> mud code areas the reply was its under WGSCNF-L3 whatever that is
you can edit the file manually WGSMMUD.MSG and under LEVEL3 enter your game code and mmud-plus code if wgscnf is not giving it to you.
> the mud codes cant be entered under the sysop menu ,thats for addon modules
> only
> I found a messge about this from 2020 where the WGSCNF.exe wont show the
> mud code areas the reply was its under WGSCNF-L3 whatever that is
you can edit the file manually WGSMMUD.MSG and under LEVEL3 enter your game code and mmud-plus code if wgscnf is not giving it to you.
- banjaxster
- Posts: 50
- Joined: Sun Aug 09, 2020 3:57 am
Re: betrieve error
Hello
Thanks again
Editing the WGSMMUD.MGS worked.
Hopefully the problem with the mud configs no showing up can be fixed
Thanks again
Editing the WGSMMUD.MGS worked.
Hopefully the problem with the mud configs no showing up can be fixed
-
- Posts: 406
- Joined: Sun Aug 09, 2020 2:39 am
Re: betrieve error
banjaxster wrote:
> Hello
> Thanks again
> Editing the WGSMMUD.MGS worked.
> Hopefully the problem with the mud configs no showing up can be fixed
HA just noticed i said WGSMMUD not WCC
> Hello
> Thanks again
> Editing the WGSMMUD.MGS worked.
> Hopefully the problem with the mud configs no showing up can be fixed
HA just noticed i said WGSMMUD not WCC