WCCMMUD options not showing in CNF

A place for new Sysops to meet, discuss their setup and get help.
Post Reply
hohum
Posts: 4
Joined: Fri Mar 03, 2023 11:12 am

WCCMMUD options not showing in CNF

Post by hohum »

All the .MSG and .MDF files are in the right place but when I load up the CNF editor, I see no MajorMUD configuration options. I can't enter my serial numbers or anything.

User avatar
Duckula
Posts: 356
Joined: Wed Jul 22, 2020 1:19 am

Re: WCCMMUD options not showing in CNF

Post by Duckula »

I think the serial numbers for MMUD are entered in the module itself via the in-game Sysop menu.

The CNF options should be there, try running WGSCNF -L99 and see if you get anything.
-- Duckula

// Site admin
// Galacticomm IP owner

hohum
Posts: 4
Joined: Fri Mar 03, 2023 11:12 am

Re: WCCMMUD options not showing in CNF

Post by hohum »

The serial numbers for the ADDONS are entered in the module; but the serial numbers for the MUD itself and MajorMUD Plus are entered in the CNF. So the fact that the options are missing is kind of a problem.

-L99 still doesn't show the WCCMMUD or MajorMUD Plus config options.

User avatar
Duckula
Posts: 356
Joined: Wed Jul 22, 2020 1:19 am

Re: WCCMMUD options not showing in CNF

Post by Duckula »

Are any of the CNF settings in there? Such as Text Blocks or nothing at all?
-- Duckula

// Site admin
// Galacticomm IP owner

hohum
Posts: 4
Joined: Fri Mar 03, 2023 11:12 am

Re: WCCMMUD options not showing in CNF

Post by hohum »

The text blocks are there.


What's missing is the entire WCCMMUD section from both Security & Accounting and General, as well as MajorMUD Plus (again from both Security & Accounting and General)

User avatar
Duckula
Posts: 356
Joined: Wed Jul 22, 2020 1:19 am

Re: WCCMMUD options not showing in CNF

Post by Duckula »

For some reason MMUD options don't show if you just run WGSNCF, which is supposed to show all options from each category. Run WGSCNF -L3 and you will find what you are looking for.
-- Duckula

// Site admin
// Galacticomm IP owner

hohum
Posts: 4
Joined: Fri Mar 03, 2023 11:12 am

Re: WCCMMUD options not showing in CNF

Post by hohum »

That worked. Thanks.

User avatar
banjaxster
Posts: 48
Joined: Sun Aug 09, 2020 3:57 am

Re: WCCMMUD options not showing in CNF

Post by banjaxster »

Duckula wrote:
> For some reason MMUD options don't show if you just run WGSNCF, which is
> supposed to show all options from each category. Run WGSCNF -L3 and you
> will find what you are looking for.
can you tell me how to run WGSCNF-L3 what is -L3? my mud configs are not there

User avatar
BlaZ
Posts: 81
Joined: Thu Oct 15, 2020 12:24 am
Location: Peoria, IL
Contact:

Re: WCCMMUD options not showing in CNF

Post by BlaZ »

Type WindowsKey+R and type C:\BBSV10\WGSCNF -L3

Or if you installed to \WGSERV, it's C:\WGSERV\WGSCNF -L3

User avatar
banjaxster
Posts: 48
Joined: Sun Aug 09, 2020 3:57 am

Re: WCCMMUD options not showing in CNF

Post by banjaxster »

Thank you so much ! it fixed the mud config not showing up
i have the BBSV10 running real well and stable

Post Reply